博九彩票

你好,欢迎光临济南兰鑫厨房排烟!

产品中心

当前位置:首页 - 常见问题 >

常见问题

密封面设在通风管道壁正压侧的说法

来源:/添加时间:2018-03-20 13:44:56
  现在通风管道大家都已经熟悉了吧,在建筑业快速发展的现在,高层建筑越来越多,为了保护在内工作人员的身体健康
  Now everyone is familiar with ventilation pipes. Nowadays, with the rapid development of construction industry, there are more and more high-rise buildings. In order to protect the health of workers,
  1、通风管道加工的过程中应该尽量避免出现纵向接缝,但是绝对不能出现横向接缝。而且通风管道的咬口缝和四角的缝隙处,需要按照设计洁净等级要求,然后还要采用密封胶将其堵严。另外通风管道板材的连接缝的密封面应该设在通风管道壁的正压侧。
  1. The longitudinal joint should be avoided in the process of the ventilation pipe processing, but there must be no transverse joint. And the gap between the bite and the four corners of the ventilation pipe should be required according to the design of the cleanliness grade, and then the sealant is also used to block it. In addition, the sealing surface of the joint joint of the ventilated pipe sheet should be located on the positive pressure side of the ventilation pipe wall.
  2、加工的时候,不能在通风管道内部设置加固框或者加固筋,因为这样对于通风管道的质量会造成一定的影响。
济南厨房排烟管道
  2. In the process of processing, the reinforcement frame or reinforcement can not be set inside the ventilation pipe, because this will have a certain effect on the quality of the ventilation pipe.
  3、通风管道加工不能采用S型插条和C型直角插条的连接方式,另外对于一些特殊的通风管道来说,还不能采用按扣式的咬口。
  3, ventilation pipe processing can not be connected by S type and C type rectangular cuttings cuttings, in addition to some special ventilation pipeline, we can not use the bite snap type.
  4、通风管道制作完毕之后,还要用清洗液进行清洗,只有达到清洗标准之后,才可以及时封口。
  4. After the ventilation pipe is finished, the cleaning liquid should be used to clean it. Only after the cleaning standard is reached, it can be sealed in time.
  5、如果是彩色涂层钢板通风管道的话,应该保持内壁是光滑的,而且通风管道加工的过程中,还不能将涂层损坏,若是出现损坏的部位,需要用环氧树脂涂刷在表面即可。
  5, if it is a color coated steel plate ventilation pipe, the inner wall should be kept smooth, and the coating can not be damaged in the process of ventilation pipe processing. If the damaged part is found, it needs to be painted on the surface with epoxy resin.
  另外通风管道加工的过程中,还要做好防腐蚀措施,不能使用抽芯铆钉,而且在通风管道零件装配的时候,这些零件都要经过镀锌处理才行。
  In addition, in the process of ventilation pipe processing, corrosion prevention measures must be done, and core pulling rivets can not be used. When parts of ventilation pipes are assembled, all parts need to be galvanized.
  本文的精彩内容来自济南厨房排烟管道详细内容请点击我们的官方网站:/谢谢您的到来!
  The wonderful content of this article comes from the detailed content of the Ji'nan kitchen exhaust pipe. Please click on our official website: / thank you for your arrival.

上一篇:蝶阀会妨碍阀板的开关通道吗?
下一篇:特殊厨房排烟系统效果不好是什么原因?

济南兰鑫厨房排烟    电话:15610162918    天天彩票网jamubiohsa.com版权所有
本网站由济南诺商提供技术支持      

本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!

友情链接:迪士尼彩票  W彩票平台  皇冠彩票  金誉彩票网  皇冠彩票官网  天天彩票网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!